Payment & Shipping Terms:
|Material:||100% Virgin Polypropylene||Product Name:||Polypropylenen Fiber 12mm|
|Fiber Diameter:||20-30um||Tensile Strength:||450Mpa Min.|
|Acid Resistance:||Strong||Application:||Concrete Reinforcement|
|Free Sample:||Yes||Lead Time:||Within 15 Days|
macro synthetic fibers,
fibrillated polypropylene fibers
Polypropylene Fiber monofilament mainly used in Mixing into cement concrete, mortar, plaster etc...,
working as anti-cracking agent in cement concrete, dry mortar or plaster field.
it has advantages of high dispersion, good water affinity, strong linking force.
It is suited to reinforce and crack-resistant to cement concrete or mortar
1, made by 100% Virgin Polypropylene as raw material.
2, We make pp yarn by ourselves, and short cut by ourselves.
3, delivery in 3-7 days
4, Capacity 1000mts/Month
|Raw Material||Polypropylene||Crack Elongation||20+/-5%|
|Fiber Type||monofilament||Fiber Diameter||20um-30um|
|Melting Point (C Deg.)||160 - 170||Density (g/cm3)||
|Acid & Alkali Resistance||Strong||Tensile Strength (MPa)||450 min.|
Times of 4mm
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm )
Packing A: 0.6kg, 0.9kg or 1.0kg per PE bag; 18kgs/carton or 20kgs/plastic woven bag;
total 9600kgs/1x20`gp; 21000kgs/1x40`hq
Packing B: 0.6, 0.9 or 1.0 kg/water soluble paper bag; 20bags or 18bags/ 18kgs/carton
total 6480kgs/1x20`gp; 16200kgs/1x40`hq
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,
and for increasing reinforce and seepage resist application1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed.
Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring
can be prolonged for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool,pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
Resist to shrink & crack
Increase seepage resistance
Increase friction resistance
Increase freezing & thawing resistance
Improve tendons protection
Replace steel net (using in plastering)
Prevent mortar split and crackle expansion
Increase impact resistance and peeling resistance
A). No agglomeration and easily spread around in mortar or concrete.
Guarantee the property of crack resistance effectively
B). Apply conveniently. No need to change the proportion of mortar,
and just put the fibers into the mortar mixture and stir for a moment after adding water.
C). Has fine economic property.
The equivalent dia. of polypropylene monofilament is only φ25um,
so the ratio of dia. And surface is high and on the basis of crack resistance,
it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.
D). Be better to plaster. Because a great number of thin fibers spread into mortar evenly,
so the plastering is much easier and this can improve the binding strength between surface and base.
E). The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Including Polypropylene fiber monofilament, we we also produce:
1. Polypropylene Microfiber Fibrillated
2. Macro synthetic fiber Twist, Wave, Hybrid
3. Polyester (PET) Fiber
Contact Person: jackhu