|Place of Origin:||China|
|Certification:||ISO, CE, FDA|
|Minimum Order Quantity:||500 kgs|
|Packaging Details:||0.6, 0.9 or 1.0 kg/water soluble paper bag or PE bag, 18kgsor 20 kgs/carton or plastic woven bag|
|Delivery Time:||3-15 days|
|Payment Terms:||T/T, Western Union, L/C, D/P|
|Supply Ability:||600 tons per month|
ELITE Polypropylene Fiber monofilament was produced by advanced technology for fiber spinning, modified by adding functional additives and special surface-treating.Mixing into cement concrete, mortar, plaster etc...,
it has many advantages such as good dispersing, better water affinity, strong linking force.
It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..
1, Our PP fiber are made by 100% Virgin Polypropylene
2, We make the pp yarn by ourselves and make many stock. We can delivey in 3-7 days.
3, Capacity 600Ton/Month, 7000Ton/Year Production
4, 70% Export to : Ecuador, Australia, Singapore, Malaysia, Vietnam, Turkey, Iran, France, Sri Lanka, Colombia...
|Raw Material||Polypropylene||Crack Elongation||20+/-5%|
|Fiber Type||monofilament||Fiber Diameter||20um-30um|
|Melting Point(C Deg.)||160 - 170||Density(g/cm3)||
|Acid &Alkali Resistance||Strong||Tensile Strength(MPa)||450 min.|
Times of 4mm
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm )
Packing A: 0.6kg, 0.9kg or 1.0kg per PE bag; 18kgs/carton or 20kgs/plastic woven bag;
total 9600kgs/1x20`gp; 21000kgs/1x40`hq
Packing B: 0.6, 0.9 or 1.0 kg/water soluble paper bag; 20bags or 18bags/ 18kgs/carton
total 6480kgs/1x20`gp; 16200kgs/1x40
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance,stirring by adding water at worksite before construction.
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool,pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
◆Resist to shrink & crack
◆Increase seepage resistance
◆Increase friction resistance
◆Increase freezing & thawing resistance
◆Improve tendons protection
◆Replace steel net (using in plastering)
◆ Prevent mortar split and crackle expansion
◆Increase impact resistance and peeling resistance
A). No agglomeration and easily spread around in mortar or concrete. Guarantee the property of crack resistance effectively
B). Apply conveniently. No need to change the proportion of mortar,
and just put the fibers into the mortar mixture and stir for a moment after adding water.
C). Has fine economic property. The equivalent dia. of polypropylene monofilament is only φ25um, so the ratio of dia. And surface is high and on the basis of crack resistance, it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.
D). Be better to plaster. Because a great number of thin fibers spread into mortar evenly, so the plastering is much easier and this can improve the binding strength between surface and base.
E). The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Including Polypropylene fiber monofilament, we we also produce:
1. Polypropylene Micro fiber Fibrillated
2. Macro synthetic fiber Twist, Wave, Hybrid
3. Polyester (PET) Fiber for Bitumen concrete
ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Rei-nforcement Fibers in the world market.
ELITE fibers are made by 100% virgin PP materials with advanced equipment of yarn and cutting. We have one full set of precise testing instrument and quality inspection team, technology research & Development team.
Elite own a team with 10+ years experience.
We know well of Chinese Concrete reinforcement fibers on technical inspection, marketing, transportation
We have been to many international exhibitions all over the world. Hope to chat with all our customers face to face.
Recently exhibition information pls refer to our website.
|Material:||100% Virgin Polypropylene PP||Product Name:||Non-corrosive Chemically Inert 100% Alkali Proof Homopolymer PP Fiber Monofilament|
|Fiber Diameter:||20-30um||Tensile Strength:||≥450Mpa|
|Acid &Alkali Resistance:||Strong||Application:||Concrete|
|Free Sample:||Yes||Lead Time:||3-15 Days|