Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement
Contact Person : Jack
Phone Number : 0086-13955140199
WhatsApp : +8613955140199
| Minimum Order Quantity : | 500 kgs | Price : | Negotiation |
|---|---|---|---|
| Packaging Details : | 120-140g/ water soluble film bundle, 5kgs/water soluble paper carton | Payment Terms : | T/T, , L/C, D/P |
| Supply Ability : | 600 tons per month |
| Place of Origin: | China | Brand Name: | Elite-indus |
|---|---|---|---|
| Certification: | ISO, CE, FDA | Model Number: | PMVE-0011 |
|
Detail Information |
|||
| Delivery Time: | 7-15days | Product Name: | Polypropylene / Polyethylene Macro Synthetic Fiberm 54mm Curved Wave Embossed Form Polypropylene Fiber |
|---|---|---|---|
| Fiber Type: | Embossed /Wave/Undee | Tensile Strength: | 550Mpa Or 650mpa Min. |
| Acid & Alkali Resistance: | Strong | Application: | Concrete Reinforcement |
| Free Sample: | Yes | Color: | White, Gray |
| High Light: | macro synthetic fibers,fibrillated polypropylene fibers |
||
Product Description
Polymer Macro Synthetic Fiber made from virgin polypropylene / polyethylene.
used to replace steel fibers, welded wire mesh and conventional reinforcing bars.
most suitable for Shotcrete, spray concrete as structural reinforcement.
Dosage rates will vary depending upon the reinforcing requirements and can range from 2.0 kg/m³ to 8.0 kg/m³.
|
Raw Material
|
Virgin grade polypropylene/polyethylene blend
|
Tensile Strength(MPa):
|
550 min.
|
|
Water Absorbency:
|
No
|
Density(g/cm3) :
|
0.91+/-0.01
|
|
Melting Point(C Deg.) :
|
160 - 170
|
Acid & Alkali Resistance
|
Excellent
|
|
Elastic Modulas(Mpa):
|
9000 min
|
Moisture Content
|
No
|
|
Length:
|
48mm, 55mm, 65mm or as per request
|
||
Packing: 120-140g/ water soluble film bundle, 5kgs/water soluble paper carton
total 1200-1300kg/pallet, 12800kg/20’ container, 25800kg/40’ container
|
Delivery Time
|
3-15 days after deposit (we always keep inventory)
|
|
Sample Time
|
1-3 days after confirmation
|
|
Production Time
|
7-15days
|
|
Payment Methods
|
T/T, L/C, or as per negotiate
|
1, Ration design of the fibre concrete:
Generally the recommended amount to add to the concrete is more than 2.7kg/m³ ( volume ratio is 0.3% ), reinforcement adding amount is 5.5kg/m³ , Compared with adding 47kg of steel fibre, 5.4kg macro synthetic fibre has the same volume ratio to the concrete.
2, Matching Ratio:
Usually, it is no need to Change the matching ratio of the concrete. Considering the requirement of fissure-resistant, the macro synthetic fibre is recommend to combine with the polypropylene fiber mesh with the volume ratio of 1:1 ( 0.9kg fiber-mesh per sqm of cement concrete).
3, Mixer Adoption: Double-axle horizontal compelling mixer is priority.
4, Mixing process:
Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes,fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to make fiber completely Mixed.
5, Shaping & Maintenance
There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.
Compared with steel fiber, our fiber has the advantages of anti-corrosion and wear-resistant reducing 50% cost with same volume to steel fiber.
1. Equivalent strengths to WWM and rebar provided by engineering calculations;
2. Controls and mitigates plastic shrinkage cracking and reduces segregation and bleed-water;
3. Provides three-dimensional reinforcement against micro and macro-cracking;
4. Reduces equipment wear, fiber rebound and increases build-up thickness compared to steel fibers for shotcrete applications;
5. Increases overall durability, fatigue resistance and flexural toughness;
6. Reduction of in-place cost versus wire mesh for temperature / shrinkage crack control;
7. Easily added to concrete mixture at any time prior to placement;
8. Tested in accordance with ASTM C 1116, EN14889-2.
The fibres are wrapped with water-soluble film and uniquely packaged in paper boxes.Just throw the whole boxes of fibres into the concrete mixture, the boxes and film will dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.
Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
Thin walled pre-cast (septic tanks, vaults, walls, etc.)
Shotcrete for tunnel linings, pool construction and slope stabilization
Pavements and white-toppings
ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Rei-nforcement Fibers in the world market.
ELITE fibers are made by 100% virgin PP materials with advanced equipment of yarn and cutting. We have one full set of precise testing instrument and quality inspection team, technology research & Development team.
Sales Team
Elite own a team with 10+ years experience.
We know well of Chinese Concrete reinforcement fibers on technical inspection, marketing, transportation
Exhibition
We have been to many international exhibitions all over the world. Hope to chat with all our customers face to face.
Recently exhibition information pls refer to our website.
Enter Your Message
| ANHUI ELITE INDUSTRIAL CO.,LTD |
| ADD: 18F Tower C, Winning Ocean Plaza, No. 680 South Maanshan Rd, Hefei 230041, China |
| 86-551-62372118 |
| jackhu@elite-indus.com |