Paper Plastic Dry Lamination Adhesive Waterborne Acrylic Based D3003

Product Description

Paper Plastic Dry Lamination Adhesive Waterborne Acrylic Based D3003

Water based acrylic lamination adhesive

(Dry Lamination Glue / Heat seal lamination glue )

Application:

For lamination of plastic film like PET, BOPP, MPET to printed paper,

silver /gold cardboard, paperboard, duplex board etc..

Packing:

(1) 50kgs/Plastic drum, 20650kgs/1x20’GP without pallet. 13500kgs/1x20`GP with pallet.

(2) 200kgs/drum,16000kgs/1x20’GP, or 1000kgs/IBC, 20000kgs/1x20’GP

Suggestion:

1, Before lamination, raise the temperature of the laminating machine roller to 95-110℃,

    the temperature of the drying tunnel to 80-95℃.

2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive

    disperse on roller evenly, The amount of adhesive consumption shall be flexibly adjusted

    according to the paper or film need to be laminated.

3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95℃,

    the roller pressure shall be around 6-20kgs.

4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film

    and connections.

Notice:

1, Clean the adhesive tank and roller before use our adhesive;

2, Do not mix our adhesive with other adhesives;

3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;

4, Better make testing for with film or paper, before mass production,

    to check the color retention or bonding strength;