98% Solid Content Concrete Admixture Polycarboxylate Ether Superplasticizer Powder

Product Description

                             Concrete Admixture Polycarboxylate Ether Superplasticizer Powder

1, Introduction:

Polycarboxylate Ether Superplasticizer Powder is a high performance 100% polycarboxylate based polymer specifically

developed as an effective dispersant fluidifier and high range water reducing agent for concrete and other mineral materials.

It is mainly used as raw material to produce different types of high performance water reducers for targeted industrial.

It complies with ASTMC 491 Type F specifications.

Characteristics:

1.Wide adaptability:It is compatible with ordinary silicate cement slag silicate cement and all kinds of blendings having excellent

dispersibility and plasticity.
2.High water reduction: The water reduction rate of concrete is above 38% improving concrete working characteristics increasing

concrete strength and durability.
3.Good slump retention ability: Guarantee concrete pumpability.
4.Good dispersibility: Making concrete have high fluidity.
5.Good cohesiveness: Making concrete have excellent workability non-segregative & non-bleeding..
6.Lower cost & NO harmful substances.

2,PCE Powder Main Performance:

Visual appearance: white powder

3,PCE Powder Packing:

1) 25kgs/Carton,12tons/20'gp

2) 25Kgs/Plastic Woven bag, 16Tons/20'gp

4,Recommed Dosage:

The recommend dosage of superplasticizer for concrete: 0.1-0.25% base on cement quantity.

Solid contents of PCE powder is 98%. Normal dosage is 0.12%-0.3%. when dosage is 0.06%, it has 12% water reducing

rate and 23% strength growth, this beyond the performance of common pumping agent in market. when dosage is 0.1%,

performance beyond that of PNS and Melamine. But when dosage is below 0.14%, its good performance is not obvious.

When dosage is above 0.20%, it is excellent in concrete fluidity and pumping performance. Therefore, the best dosage is

recommended as 0.12-0.24%; when making concrete with high grade, big dosage of flyash or superfine slag powder or other

special requirements, dosage can be expanded to 0.3-0.5%. Test state that there is no cohesion and bleeding in concrete

even the dosage expand to 0.5%, and its water-reducing rate still increase . But air content increase, setting delay,

strength decrease.

5,Application: 

Polycarboxylate superplasticizer powder is widely used in dry-mortar and concrete systems, such as High performance

concrete, High flowability concrete, High durability concrete, Aluminate cement refractory concrete, Low cement refractory

castable concrete, Steam curing concrete, Self-leveling concrete, High strength mortar, Gypsum products, Self-leveling

floor, Joint filler, Grouts etc. Poly-Carboxylate is a superplasticizer for high performance concrete, high strength concrete,

high volume fly ash/slag concrete and grouting/self-leveling screed/mortar.

5.PCE Powder Use Method

(1)According to the design of concrete, adjust quantity the water or sand to make sure the slumps,strength, setting all to meet

with requirements base on the required dosage of admixture.

(2)It apply to concrete with high performance ,strength and fluidity. When make C50 concrete,it should choose the suitable

material according to relative technology rule and confirm the suitable mixing technology base on enough test data.

To make sure the fluidity of concrete can meet with the requirements of engineering, the strength of concrete should have surplus .

(3)This product can be added into concrete together with water which is used in mixing. but it will get better performance

if mix it with water firstly.

6,PCE Powder Safety and Attention:

(1)This product is alkalescence solid without toxic, corrosiveness and pollution. It is unedible.when it come to body and eye,

please wash it in clean water. When there is allergy for some body,please send the person to hospital rapidly for cure.

(2)This product is storaged in paper barrel with PE bag inner. Avoid rain and sundries to mix in.

(3)Quality guarantee period is 12 months

7, Our Company:

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all

kinds of Concrete additive in the world market.Our Product were widely used in all kinds of concrete,mortar,plaster projects

and exported to more than 30 countries, Such as USA,Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.

Our Product was made by 100% Virgin Material with advanced equipment , we have one full set of precise testing instrument,

testing equipment and quality inspection team, technology research and development team. the management system was

certified by ISO9001 and our products have been passed the CE Certification.

8, Related Product: