Payment & Shipping Terms:
|Solid Content:||98%||Water Reduing Rate:||30%|
|Total Alkali:||<5%||Material:||Polycarboxylate Ether|
|Application:||Dry Mix Of Mortar And Concrete||Name:||Polycarboxylate Ether Superplasticizer Powder|
|Other Name:||Polycarboxylic Acid Superplasticizer Powder||Classification:||Chemical Auxiliary Agent|
polycarboxylate concrete admixtures,
hdpe geomembrane sheet
Polycarboxylic Acid Polycarboxylate Ether Superplasticizer PCE Powder
Polycarboxylic Acid Polycarboxylate Ether Superplasticizer is a free flowing, spray dried powder of new generation poly-carboxylate
polymer, used as a superplasticizer for cement based materials. It is also an excellent dispersion plasticizer suitable for gypsum,
ceramic and other mineral materials. It complies with ASTMC 491 Type F specifications.
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage.
2,PCE Powder Main Performance:
Visual appearance: white powder
|Density||Solid Content||PH value||Chloridion||Total Alkali|
3,PCE Powder Packing:
2) 25Kgs/Plastic Woven bag, 16Tons/20'gp
The recommend dosage of superplasticizer for concrete: 0.1-0.25% base on cement quantity.
Solid contents of PCE powder is 98%. Normal dosage is 0.12%-0.3%. when dosage is 0.06%, it has 12% water reducing
rate and 23% strength growth, this beyond the performance of common pumping agent in market. when dosage is 0.1%,
performance beyond that of PNS and Melamine. But when dosage is below 0.14%, its good performance is not obvious.
When dosage is above 0.20%, it is excellent in concrete fluidity and pumping performance. Therefore, the best dosage is
recommended as 0.12-0.24%; when making concrete with high grade, big dosage of flyash or superfine slag powder or other
special requirements, dosage can be expanded to 0.3-0.5%. Test state that there is no cohesion and bleeding in concrete
even the dosage expand to 0.5%, and its water-reducing rate still increase . But air content increase, setting delay,
Polycarboxylate superplasticizer powder is widely used in dry-mortar and concrete systems, such as High performance
concrete, High flowability concrete, High durability concrete, Aluminate cement refractory concrete, Low cement refractory
castable concrete, Steam curing concrete, Self-leveling concrete, High strength mortar, Gypsum products, Self-leveling
floor, Joint filler, Grouts etc. Poly-Carboxylate is a superplasticizer for high performance concrete, high strength concrete,
high volume fly ash/slag concrete and grouting/self-leveling screed/mortar.
5.PCE Powder Use Method
(1)According to the design of concrete, adjust quantity the water or sand to make sure the slumps,strength, setting all to meet
with requirements base on the required dosage of admixture.
(2)It apply to concrete with high performance ,strength and fluidity. When make C50 concrete,it should choose the suitable
material according to relative technology rule and confirm the suitable mixing technology base on enough test data.
To make sure the fluidity of concrete can meet with the requirements of engineering, the strength of concrete should have surplus .
(3)This product can be added into concrete together with water which is used in mixing. but it will get better performance
if mix it with water firstly.
6,PCE Powder Safety and Attention:
(1)This product is alkalescence solid without toxic, corrosiveness and pollution. It is unedible.when it come to body and eye,
please wash it in clean water. When there is allergy for some body,please send the person to hospital rapidly for cure.
(2)This product is storaged in paper barrel with PE bag inner. Avoid rain and sundries to mix in.
(3)Quality guarantee period is 12 months
7, Our Company:
Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all
kinds of Concrete additive in the world market.Our Product were widely used in all kinds of concrete,mortar,plaster projects
and exported to more than 30 countries, Such as USA,Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.
Our Product was made by 100% Virgin Material with advanced equipment , we have one full set of precise testing instrument,
testing equipment and quality inspection team, technology research and development team. the management system was
certified by ISO9001 and our products have been passed the CE Certification.
Our Mainly Product and Production Capacity as below:
Polypropylene Fiber (PP Fiber)
Polyester Fiber(PET Fiber)
Polyvinyl Alcohol Fiber( PVA Fiber)
Polyacrylonitrile Fiber(PAN Fiber)
Naphthalene Formaldehyde Sulphonate(SNF)
Polycarboxylate Superplasticizer PCE(Flake/Powder/Liquid)
8, Related Product:
PP Fiber Monofilament PP Fiber Fibrillated PP Fiber Wave/Curved
PP Fiber Twist/Hybrid Polyester ( PET) Fiber PVA Fiber
Contact Person: mika