Payment & Shipping Terms:
|Free Sample:||Yes||Net Starch Fluidity:||250mm Min.|
|Sodium Sulphate Content:||3%， 5%, 10%, 20%||PH Value:||7-9|
|Application:||Mortar And Concrete||Fuction:||Water Reducer|
concrete water reducer,
hdpe geomembrane sheet
NaSO4 3% 5% 10% 18% 20% Dispersing Sodium Naphthalene Sulfonic Acid Formaldehyde
Naphthalene formaldehyde sulphonate is a kind water reducing agent used in concrete as concrete admixture.
it is a synthetic powder based on beta-sulphonate formaldehyde ondensate and reactive polymer.
It has the properties of high range water reduction, set retarding and excellent strengthening.
it suitable to middle strength or high strength concrete where high range water reduction is desired.
Naphthalene Sulfonate Formaldehyde (SNF/NSF /PNS)
complies with the requirements of the following standards: ASTM C 494, Type F; ASTM C 1017.
Other Name: Naphthalene Superplasticizer
Poly Naphthalene Sulfonate (PNS)
Chemical Name: sodium naphthalene sulfonate formaldehyde
(a high range water reducer, commonly referred to as a super plasticizer)
Applicaation: Concrete, cement admixture
|Light brown powder||Light brown powder|
|Solid Content||≥ 92||≥ 92||≥ 92||≥ 92|
|Net Starch Fluidity||≥ 250 mm||≥ 250 mm||≥ 240 mm||≥ 230 mm|
To provide initial workability especially with low water cement ratio.
To significantly improve the initial workability of site mixed concrete without increasing water demand.
To provide improved durability by increasing ultimate strengths and reducing concrete permeability.
To have high slump retention with early setting time.
Typical Applications & Advantages :
1. Powerful plasticizing action with improved initial workability.
2. Reduces water cement ratio to the maximum which allows production of high strength concrete while saving cement use.
3. Improved cohesion and particle dispersion minimizes segregation and bleeding and improves pumpability.
4. Long haul and hot weather concreting.
5. Gains early strength with very high slump retention
|Construction Chemical||Super Plasticizers|
|Cement||Water Reducer & rapid setting /Cement grinding|
|Admix||Super -Plasticizer increases compressive strength & workability to concrete|
|Gypsum, Clay, Ceramics||Water Reducer allows to prepare a higher solids slurries, increase production.|
|Oil Field||Viscosity reducer of cement slurry used in cementing casing in wells.|
|Dispersed Dyes||Azo and Anthraquinone Disperse Dyes|
|Chemical Industry||Textile, Pesticide, Paint, Leather, Pigment, Ink|
3-15 days after deposit (we always keep inventory)
1-3 days after confirmation
T/T, L/C, or as per negotiate
The optimum dosage of Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) to meet specific requirements should always be determined
by trials using the materials and conditions that will be experienced in use.
Our suggestions as below:
A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water Moisturization (water-cement ratio:60%).
Contact Person: helen