Factory Directly Supply Monofilament Microfiber Polypropylene Fiber For Concrete Reinforce
|Minimum Order Quantity :||500kgs||Price :||1500-2000USD/Ton|
|Packaging Details :||25kgs/bag.10tons/20'gp.20tons/40'GP||Delivery Time :||5-8 WORK DAYS|
|Payment Terms :||L/C, D/A, D/P, T/T, Western Union||Supply Ability :||500000TON PER YEAR|
|Place of Origin:||CHINA||Brand Name:||elite-indus|
|Certification:||ISO||Model Number:||Monofilament Form|
|Water Absorbency:||NO||Fiber Diameter:||20um-30um|
|Length::||Times Of 4mm Or 6mm||Density(g/cm3):||0.91+/-0.01|
|Product Name:||6mm 12mm 18mm Cracking-resistance Reinforced Polypropylene Concrete Microfiber For Concrete Wall||Crack Elongation:||20+/-5%|
Polypropylene Concrete Microfiber,
18mm Concrete Microfiber,
6mm 12mm 18mm Cracking-resistance reinforced Polypropylene Concrete Microfiber for concrete wall
Polypropylene Concrete Microfiber PROPERTIES:
Polypropylene fiber for concrete is a polypropylene as the main raw material, adopting unique manufacturing process to make high strength bundle monofilament fiber. Adding into concrete (or mortar) can effectively control concrete (or mortar) micro-cracks which is caused by plastic shrinkage, temperature changes and other factors, to prevent and inhibit the formation and development of cracks, greatly improve crack resistance of concrete, impact resistance and seismic capacity.
Polypropylene Concrete Microfiber SPECIFICATIONS:
|Raw Material||Polypropylene||Crack Elongation||20+/-5%|
|Fiber Type||monofilament||Fiber Diameter||20um-30um|
|Melting Point(C Deg.)||160 - 170||Density(g/cm3)||
|Acid &Alkali Resistance||Strong||Tensile Strength(MPa)||450 min.|
Times of 4mm
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm with 1mm more or less )
Polypropylene Concrete Microfiber APPLICATIONS:
◆Resist to shrink & crack ◆Increase seepage resistance
◆Increase friction resistance ◆Increase freezing & thawing resistance
◆Improve tendons protection ◆Replace steel net (using in plastering)
◆ Prevent mortar split and crackle expansion
◆Increase impact resistance and peeling resistance
A). No agglomeration and easily spread around in mortar or concrete.
Guarantee the property of crack resistance effectively
B). Apply conveniently. No need to change the proportion of mortar,
and just put the fibers into the mortar mixture and stir for a moment after adding water.
C). Has fine economic property. The equivalent dia. of polypropylene monofilament is only φ
25um, so the ratio of dia. And surface is high and on the basis of crack resistance,
it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.
D). Be better to plaster. Because a great number of thin fibers spread into mortar evenly,
so the plastering is much easier and this can improve the binding strength between
surface and base.
E). The fiber has stable chemical property, strong acid &alkali resistance, and can be
used in any engineering projects.
• Precast • Hazardous material storage • Septic tanks
• Stucco • Agricultural products • Tanks and storage
• Marine products • Walls • Shotcrete
4. Applying Instruction:
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar
Is enough, and for increasing reinforce and seepage resist application
1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no
need to be changed. Put cement, aggregate, additive and fiber together,
then stir after adding enough water and time for stirring can be prolonged
for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance,
stirring by adding water at worksite before construction.
PACKING: normal packing is 0.6kg, 0.9kg or 1.0kg a pe film bag,
18kgs/carton or 20kgs/plastic woven bag.
Water soluble paper bag is available.