Payment & Shipping Terms:
|Apearance:||Milky White Emulsion||OEM:||Yes|
|Free Sample:||Below 400g By Express||PH Value:||6.0-8.0|
|Solid Content:||37-42%||Quality Guarantee Period:||6months|
|Feature:||Suit For High Speed Lamination Process|
water based acrylic adhesive,
hot melt adhesive glue
paper–plastic dry laminating adhesive D50 series for dry-type high speed lamination machine
Water based acrylic emulsion lamination adhesive
(Dry Lamination Glue / Heat seal lamination glue )
speical use for high speed lamination machine
For lamination of plastic film like PET, BOPP, MPET to printed paper or silver /gold cardboard.
Suit for dry /heat seal type manual and automatic laminating machine.
1, special use for high speed lamination process
2, lower adhesive consumption, reduce production cost
3, suitable for high speed lamination machine,
such as milk box, carton etc..
without embossing process.
1, Appearance: Milky
2, Viscosity (MPA.S):
3, PH value: 6.0-8.0
4, Storage: 6 months
5, Toxicity: non toxic
6, Solid content:
Noted: can be suitable for dry-type automatic with higher speed,
Recommend to be used for compounding gold silver and ink printing, or gray board paper printing.
1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
(1), 50kgs/Plastic drum, 20650kgs/1x20’GP without pallet. 13500kgs/1x20`gp withou pallet.
(3), 1000kgs/IBC, 20000kgs/1x20’GP
1, Before lamination, raise the temperature of the laminating machine roller to 95-110℃,
the temperature of the drying tunnel to 80-95℃.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive disperse
on roller evenly, The amount of adhesive consumption shall be flexibly adjusted according to
the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95℃,
the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production, to check the color retention or bonding strength;
Contact Person: olina