Payment & Shipping Terms:
|OEM:||Yes||Appearance:||Milky White Emulsion|
|Components:||Acrylate Copolymer||Note:||Solvent-free, Mono-component|
water based adhesive,
water based acrylic glue
Paper Plastic Dry Lamination Adhesive Waterborne Acrylic Based D3003
Water based acrylic lamination adhesive
(Dry Lamination Glue / Heat seal lamination glue )
For lamination of plastic film like PET, BOPP, MPET to printed paper,
silver /gold cardboard, paperboard, duplex board etc..
|Type||Solid content||Features||Technical Parameter|
1, Good surface effect, good brightness
and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for common cartons of fruit, food etc...
5, most suitable for PET film to paper ...
Milky white emulsion
2, Viscosity (MPA.S):
3, PH value: 6.0-8.0
4, Storage: 6 months
5, Toxicity: non toxic
1, Excellent powder cover ability,
and composite fastness
2, High brightness and high speed lamination
3, Super effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc...
4, suitable for double side lamination,
gold/silver card paper lamination.
1, special use for high speed lamination process.
2, lower adhesive consumption, reduce production cost
3, suitable for high speed lamination machine,
such as milk box, carton etc..
without embossing process.
(1) 50kgs/Plastic drum, 20650kgs/1x20’GP without pallet. 13500kgs/1x20`GP with pallet.
(2) 200kgs/drum,16000kgs/1x20’GP, or 1000kgs/IBC, 20000kgs/1x20’GP
1, Before lamination, raise the temperature of the laminating machine roller to 95-110℃,
the temperature of the drying tunnel to 80-95℃.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive
disperse on roller evenly, The amount of adhesive consumption shall be flexibly adjusted
according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95℃,
the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
4, Better make testing for with film or paper, before mass production,
to check the color retention or bonding strength;
Contact Person: olina