cold seal lamination glue C50 series free of heating process Milky white liquid

Basic Information
Place of Origin: Anhui,China
Brand Name: elite-indus
Certification: none
Model Number: wet glue C50series
Minimum Order Quantity: 1000kgs by LCL
Price: USD1.10-1.20 per kg
Packaging Details: 25kgs, 50kgs, 200kgs, 1000kgs IBC.
Delivery Time: within 15days after order confirmed.
Payment Terms: L/C, T/T, Western Union
Supply Ability: 15000mts per year

Water based acrylic emulsion adhesive

For Plastic film to paper lamination

( Wet Lamination Glue / Cold Lamination Glue )


Brief introduction:


It is a water based acrylic emulsion adhesive with mono-component, eco-friendly, solvent-free glue for lamination, it is much better than solvent based glue, with the features of good for human healthy, safety while use, easy clean the lamination machine, good binding strength etc...



For laminate/bond plastic film like PET, BOPP, MPET to paper, paper board, duplex board.

Suit for manual, Semi-Auto and Automatic machines.

Components: Acrylate copolymer

NOTE: use for room temperature seal/bond without heating.


Type Features

Technical Parameter



1, Lower cost

2, Can add 40%-50% water

   ( Solid Content 35-30%,Viscosity 60-120sec. )

3, good powder cover ability


Appearance: Milky white emulsion

Solid content: 50%±2

PH value: 5.5-7.5



1, Execellent lamination property

2, Can add 20%-40% water

   ( Solid Content 42-35%,Viscosity 120-180sec. )

3, better powder cover property


Appearance: Milky white emulsion

Solid content: 50%±2

PH value: 5.5-7.5


Customized grade


Solid content can be adjusted as per your request from 20% to 45%





1, Can add water to reduce the lamination cost;

2, Superior gloss and better ink transfer, paper tear and superior bonding strength.

3, Retain good bond at lower temperatures. ü

4, Advantages to Carton/Packaging industry with cold/room temperature lamination process.

5, Eco-friendly, solvent-free.


Applying process and precautions:

1, Avoid exposure the adhesive in the sun in summmer season and keep in cool place, in particular above 0℃ in winter. If adhesive was freezed, don't heat it up at once and should place it in room with temperature above 5℃ to make it melt slowly. If no layer separation phenomenon after melting, filter with 100 mesh screen. 2, after open the drum/bag, seal the bag if cannot use it out shortly.

3, cannot mix our adhesive with products, to avoid other chemical reaction.

4, if you want to add pure/clean water, the quantity of water added must be as per our suggestion.

5, laminate film only after the printing ink on paper was dry completely.

6, clean the roller and adhesive tank before production, to avoid any adhesive skin and impurity come inside.

7, Corona value on BOPP film surface must be above 39 dyne.

8, Adhesive consumption depends on papaer, ink and film.

9, after spray powder on printing products, rub powder before laminated film.

10, while change film roll or paper, cannot wait too long to avoid adhesive on roller is dry.

11, put the laminated paper in dry place, untill it is transparent not white, then continue further process.

12, please test it, if you change printed paper or film, then start mass production.



(1), 50kgs/Plastic drum, 20650kgs/20’GP

(2) 200kgs/drum,16000kgs/20’GP

Contact Details