Payment & Shipping Terms:
|Appearance:||Milky White Emulsion||Viscosity (No.4 Cup):||16+/-4s|
|PH Value:||6.0-8.0||Free Sample:||Below 400g By Express|
|Advantage:||Speical Use For PET Film To Printed Paper Laminate|
water based adhesive,
water based acrylic glue,
White Emulsion Dry Lamination Adhesive
Water based acrylic lamination adhesive
speical use for PET film laminated to printed paper
Dry Lamination Glue
Heat seal lamination glue
It is benzene/toluene free water based acrylic polymer adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to plastic film, drying the adhesive with heat and air flow and then laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) via a heat compression nip.
For lamination of plastic film like PET, MPET to printed paper.
Suit for dry /heat seal type manual and automatic laminating machine.
1, Good surface effect, good brightness
and good composite fastness
2, apply for higher speed lamination
3, Less glue consumption, reduce production cost
4, most suitable for PET film to paper ...
Milky white emulsion
2, Viscosity (MPA.S):
3, PH value: 6.0-8.0
4, Storage: 6 months
5, Toxicity: non toxic
6, Solid content:
1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
(1), 50kgs/Plastic drum, 20650kgs/1x20’GP without pallet.
13500kgs/1x20`gp withou pallet.
(3), 1000kgs/IBC, 20000kgs/1x20’GP
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
5, Better make testing for with film or paper, before mass production,
to check the color retention or bonding strength;
Contact Person: olina