HDPE Dimple Geomembrane Composite Geotextile Board thickness 0.5mm dimple height 10mm For Drainage
HDPE Dimple Geomembrane Introduction:
EltMembrane-CDG series of HDPE dimple geomembrane is manufactured from High Density Polyethylene resins.
Produced by extruding plastic sheet into dimple shape.These dimples,in spatial structure with certain height. Can resist long-term high pressure without deformation.
On the top of the dimples, also can composite one layer filtration geotextile to make sure
the drainage channel ruing well without any block for any articles. Such as filling particles or concrete.
HDPE Dimple Geomembrane Property:
low-cost, high efficiency; durable; chemical resistance, resistance to puncture of plant roots; diverse application; simple installation and quality guaranteed.
HDPE Dimple geomembrane productive process:
HDPE Dimple Geomembrane Application:
1, Landscape engineering: garage top greening,
roof garden, football field, golf course, beach project.
2, Municipal engineering: road base, subway, tunnel, landfill
3, Construction engineering : upper or bottom layer of building
foundation, basement wall, bedding filtration and heat insulation.
4, Traffic engineering: highway, railway basement, dam and slope.
HDPE Dimple Geomembrane Specification:
|NO.||Item Name||Technical requirements|
|1||Tensile Strength N/5cm ≥||400||400||500||500||700||700|
|2||Elongation at Break % ≥||200||200||300||300||400||400|
|3||Dimensional Strength Mpa ≥||400||320||450||370||500||420|
|4||Dimensional Stability %||±2|
|5||Low Temperature Impact Brittle Property||－35℃ crack-free bending|
|6||Longitudinal Flow Capacity cm3/s( hydraulic pressure 5Kpa)||5.6||8.6||5.6||8.6||5.6||8.6|
|7||Longitudinal Flow Capacity cm3/s( hydraulic pressure 350Kpa)||15.2||18.2||15.2||18.2||15.2||18.2|
HDPE Dimple Geomembrane Packing:
|Board Thickness:||0.5mm To 2.0mm||Dimple Height:||10mm 15mm 20mm|
|Material:||HDPE||Composite Geotextile:||PP Or PET Non Woven|
|Composite Geotextile Weight:||100g/m2 To 200g/m2||Width:||1m To 3m|