Send Message

Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement

Product Details:
Place of Origin: Anhui
Certification: CE ISO
Model Number: EltFiber-PMFT
Payment & Shipping Terms:
Minimum Order Quantity: 1000kgs
Price: Negotiation
Packaging Details: 1kg/PE film bag, 10kg/Plastic Woven bag,5500kgs/20'gp
Delivery Time: Within 15days after order confirmation
Payment Terms: L/C, D/P, T/T,
Supply Ability: 10000TON PER YEARS

Detail Information

Features: Instead Of Steel Fibre Raw Material: High Quality PP/PE Polymer
Fiber Length: Normal Is 48mm 54mm, Can As Per Your Request Elastic Modulas: Min 3500MPa
Fiber Equivalent Diameter: 0.25-0.3 Mm Melting Point(C Deg.): 160 - 170
Density(g/cm3): 0.91+/-0.01 Tensile Strength(MPa): 500 Min.
Appearance: Twist
High Light:

fibrillated polypropylene fibers


synthetic polymer fibers


Twist Synthetic Polymer Fibers

Product Description

                 High Quality Polypropylene polymer Synthetic Macrofiber For Concrete reinforcement

                                                                                                               ---------- EltFiber-PMFT


1, Description:


Polymer synthetic macrofiber use virgin pp or pp/pe as raw material, after extruding from different mould and technology,

we can get 6 different types of fiber, including

Monofilament form, Fibrillated Mesh form, Twisted /hybrid Bunchy , Wave form, Embossed form, Blend form with different size.


These fiber can improve the reinforcement of mortar or concrete performance effectively to make them

strong and protect the projects.


EltFiber-PMFT Polypropylene Copolymer Macro Synthetic Reinforcement Fibers can be used to instead of steel fibre for reinforcement

to cement concrete. Compared with steel fibre, it has the advantage of easy dispersing and blending, no damage to the mixing equipments, etc



Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 0

                       PMFT-A: 100% Twist Fiber                                             PMFT-B: Hybrid(PP Twist Fiber Mix with PP Fibrillated Fiber)


The rigid polymer fibre is used polypropylene/ pe as its raw material, produced the rough surface Treatment by special parallel thread 

extruding & twisting process. It has high break strength, better dispersion and strong combining ability, will be widely used to instead 

of steel fibre to reinforce the cement concrete and crack resistant.


2, Production Process


Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 1




0.91 +/- 0.01
Raw material
Equivalent Dia(mm)
break tensile Ratio(%)
Crack Ratio
20+/-5 %
Melting point ( C. Deg)
Tensile Strength
>500 MPa
Water absorbency
Elastic Modulus (mPa)
Resistance to acid & alkali


4, Packing:


Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 2


5,Delivery Time


Delivery Time 3-15 days after deposit (we always keep inventory)
Sample Time 1-3 days after confirmation
Production Time 7-15days
Payment Methods T/T, L/C, or as per negotiate


6, Applying Instruction:


1), Ration design of the fibre concrete:

Generally the recommended amount to add to the concrete is more than 2.7kg per sqm ( volume ratio is 0.3% ), reinforcement adding

amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.

2), Length:

48mm or 54mm for common crack-resistant requirement. Other length can as per your request, such as 19mm, 36mm.

3), Matching Ratio:

Usually, it is no need to Change the matching ratio of the concrete. Considering the requirement of fissure-resistant, the polymer

fiber is recommend to combine with the polypropylene fiber mesh with the volume ratio of 1:1 ( 0.9kg fiber-mesh per sqm of cement concrete).

4), Mixer Adoption: Double-axle horizontal compelling mixer is priority.


5), Mixing process:

Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes,fiber will fully spread and then add

cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be

properly prolonged to make fiber completely Mixed.


6), Shaping & Maintenance

There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same

as the normal concrete.




1). The surface of road, bridge, runway and floor of the factory.
2). Wall and roof of the tunnel and mine.
3). Dam, river, bridge pier, dock and military protection facilities.



Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 3


7, Our Company:


Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all kinds of

Concrete Admixture in the world market.


Our Product were widely used in all kinds of concrete,mortar,plaster projects and exported to more than 30 countries, Such as USA,

Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.


Our Fibers was made by 100% Virgin Material with advanced equipment of yard and cutting, we have one full set of precise testing

instrument, testing equipment and quality inspection team, technology research and development team. the management system

was certified by ISO9001 and our products have been passed the CE Certification.



Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 4



Our Mainly Product and Production Capacity as below:


Main Item
Polypropylene Fiber (PP Fiber)
Polyester Fiber(PET Fiber)
Polyvinyl Alcohol Fiber( PVA Fiber)
Polyacrylonitrile Fiber(PAN Fiber)
Naphthalene Formaldehyde Sulphonate
Polycarboxylate Superplasticizer(Flake/Powder/Liquid)
Foam Agent


8, Related Product:


Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement 5


9,Contact Information:


Mika Chang

Tel/Whatsapp/Wechat: 0086-15212447276
Email: mika@elite-indus(dot)com


Get in touch with us

Enter Your Message

You Might Be Into These