20mm Length Polypropylene Synthetic Fiber Ruredil X Fiber 20 Strong Acid / Alkali Resistance

Product Description

                       Microsynthetic Fiber Modified Polypropylene Monofilament Ruredil X Fiber 20

1, Description:

Microsynthetic Fiber Modified Polypropylene Monofilament was produced by advanced technology

for fiber spinning, modified by adding functional additives and special surface-treating. Mixing into cement concrete, mortar, plaster etc...,

3, Applications:

A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

D). Suit for any mortar projects and common concrete projects.

E). Highway, bridge and other roads.

4, Applying Instruction:

A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,

      and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed.

    Put cement, aggregate, additive and fiber together, then stir after adding enough water

    and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.

   Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.

5, Brief specification:

    Compliance ASTM C1116, Type III  BS EN 14889 - 2

1), Normal Type MicroFiber Monofilament PPMF-A

2), Special Type MicroFiber Monofilament

A, MicroFiber Monofilament PPMF-B: High Tensile Strength ----------- 600MPa Min

B ,MicroFiber Monofilament PPMF-C: Superfine--------------------------- 20+/-2um Dia

C, MicroFiber Monofilament PPMF-D: High dispersion------------------- Special Surface-Treating

6, Packing: