24mm PP Monofilament Similar Concrete Reinforcement Fiber

Product Description

                               PP Fiber Microfiber Monofilament Similar To FORTA-FERRO

1, Description:

ELT-Mono fiber Made by 100% virgin homopolymer polypropylene multifilament (monofilament) fibers was produced by our

patent advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into

cement concrete, it has many advantages such as good dispersing,better water affinity, strong linking force. It is suited to reinforce

and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..

ELT-Mono is a monofilament polypropylene microfiber for concrete reinforcement that complies with ASTM C 1116, Standard

Specification for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic

shrinkage cracking in concrete. Typically used at a dosage rate of 0.6kg/m3 to 1.8kg/m3.

3, Applications:

A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

D). Suit for any mortar projects and common concrete projects.

E). Highway, bridge and other roads.

4, Applying Instruction:

A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,

                    and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed.

                                        Put cement, aggregate, additive and fiber together, then stir after adding enough water

                                        and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.

      Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.

5, Brief specification:

Compliance 

ASTM C1116, Type III

BS EN 14889 - 2

1), Normal Type MicroFiber Monofilament PPMF-A

2),Special Type MicroFiber Monofilament

A, MicroFiber Monofilament PPMF-B: High Tensile Strength -----------600MPa Min

B, MicroFiber Monofilament PPMF-C: Superfine---------------------------20+/-2um Dia

C, MicroFiber Monofilament PPMF-D: High dispersion------------------Special Surface-Treating

6, Packing: