Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement
Contact Person : Jack
Phone Number : 0086-13955140199
WhatsApp : +8613955140199
| Minimum Order Quantity : | 500 kgs | Price : | Negotiation |
|---|---|---|---|
| Packaging Details : | 1.0 kg/ PE bag, 10 kgs/plastic woven bag | Delivery Time : | 3-15 days |
| Payment Terms : | T/T, ,L/C, D/P, Western Union | Supply Ability : | 600 tons per month |
| Place of Origin: | China | Brand Name: | Elite-indus |
|---|---|---|---|
| Certification: | ISO, CE, FDA | Model Number: | PMFC-0023 |
|
Detail Information |
|||
| Product Name: | Macro Synthetic Fiber For Concrete ReinforcementFiber Mesh For Gypsum Concrete | Fiber Type: | Curved Wave/Undee |
|---|---|---|---|
| Tensile Strength: | ≥450Mpa | Acid &Alkali Resistance: | Strong |
| Application: | Concrete | Free Sample: | Yes |
| Delivery Time: | 3-15 Days | Color: | White, Black, Gray |
| High Light: | macro synthetic fibers,synthetic polymer fibers |
||
Product Description
Compared with steel fiber,
our fiber has the advantages of anti-corrosion and wear-resistant reducing 50% cost with same volume to steel fiber.
Elite Macro Synthetic Fiber of Wave Form is a patented polypropylene / polyethylene macro synthetic fiber successfully used to replace steel fibers, welded wire mesh and conventional reinforcing bars in a wide variety of applications.
Our Macro Synthetic Fiber comply with ISO CE and suitable for Concrete and Shotcrete, and are specifically used to provide equivalent tensile and bending resistance to conventional reinforcement requirements.
|
Raw Material
|
Virgin grade copolymer
|
Tensile Strength(MPa):
|
480 min.
|
|
Water Absorbency:
|
No
|
Density(g/cm3) :
|
0.91+/-0.01
|
|
Melting Point(C Deg.) :
|
160 - 170
|
Equivalent Dia(mm):
|
0.8-1.2
|
|
Elastic Modulas(Mpa):
|
3500 min
|
Crack Ratio:
|
15+/-5%
|
|
Length:
|
30mm, 48mm, 54mm or as per request
|
||
Packing : 1.0kg per PE bag; 10 kgs/plastic woven bag;
total 3100 kgs/1x20`gp; 7500 kgs/1x40`hq
|
Delivery Time
|
3-15 days after deposit (we always keep inventory)
|
|
Sample Time
|
1-3 days after confirmation
|
|
Production Time
|
7-15days
|
|
Payment Methods
|
T/T, L/C, or as per negotiate
|
1, Ration design of the fibre concrete:
Generally the recommended amount to add to the concrete is more than 2.0-3.0 kg/m³ ( volume ratio is 0.3% ), reinforcement adding amount is 5.5kg/m³ , Compared with adding 47kg of steel fibre, 5.4kg macro synthetic fibre has the same volume ratio to the concrete.
2, Matching Ratio:
Usually, it is no need to Change the matching ratio of the concrete.
3, Mixer Adoption: Double-axle horizontal compelling mixer is priority.
4, Mixing process:
Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to make fiber completely Mixed.
5, Shaping & Maintenance
There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.
• Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
• Thin walled pre-cast (septic tanks, vaults, walls, etc.)
• Shotcrete for tunnel linings, pool construction and slope stabilization
• Pavements and white-toppings
Compared with steel fiber, our fiber has the advantages of anti-corrosion and wear-resistant reducing 50% cost with same volume to steel fiber.
1. Equivalent strengths to WWM and rebar provided by engineering calculations;
2. Controls and mitigates plastic shrinkage cracking and reduces segregation and bleed-water;
3. Provides three-dimensional reinforcement against micro and macro-cracking;
4. Reduces equipment wear, fiber rebound and increases build-up thickness compared to steel fibers for shotcrete applications;
5. Increases overall durability, fatigue resistance and flexural toughness;
6. Reduction of in-place cost versus wire mesh for temperature / shrinkage crack control;
7. Easily added to concrete mixture at any time prior to placement;
8. Tested in accordance with ASTM C 1116, EN14889-2.
Including Macro Synthetic Fiber Wave, we we also produce:
1. Polypropylene Micro fiber monofilament, fibrillated
2. Macro synthetic fiber Twist, Wave, Hybrid
3. Polyester (PET) Fiber for Bitumen concrete
Enter Your Message
| ANHUI ELITE INDUSTRIAL CO.,LTD |
| ADD: 18F Tower C, Winning Ocean Plaza, No. 680 South Maanshan Rd, Hefei 230041, China |
| 86-551-62372118 |
| jackhu@elite-indus.com |