ELT-SR Type Concrete Admixture Water Reducer PCE Liquid Slump Retention

Product Description

                     Polycarboxylate Based Water Reducer PCE Liquid Slump Retention Superplasticizer ELT-SR Type

1,Product Description

Elt-SR(Slump retention style) is an environment-friendly polycarboxylate high performance water reducer with high water reducing ratio

and excellent slump performance,during a long time it still has a better construction performance and has less impaction on the setting time.

Especially suitable for flowing self-compacting concrete such as long-distance transport and hot climatic conditions for ready-mixed concrete,

and the other concrete works that require high slump performance.

2.Production Characteristic

A. High water reduction: The water reduction rate of concrete is above 40%.

B. Easying to control production: Controling water reduction ratio, plasticity and air entraining by adjusting molecular weight of main chain,

length and density of side chain, type of sidechain group.

C. Good dispersion: High fluidity of concrete results in deposing and compacting easily for self-compacting concrete.

D. High strength gained rate: Greatly increasing early and after strength, reducing energy loss. Reduction of cracking, shrinkage and creep.

E.Wide adaptability: It is compatible with ordinary silicate cement, silicate cement, slag silicate cement and all kinds of blendings having

excellent dispersibility and plasticity.

F. Good strength and durability: low lacuna rate, low alkali and chlorin-ion content. Enhancing concrete strength and durability.

G. Environmental friendly products: No pollution during production.

H. Low-consume,Low-cost: It can be produced in little cycle and little-consume.Especially it can be used in commercial concrete.

3,Specification:

4,Methods of use

1.The dosage of ELT-WR is suggested as follows (wt.% of cement): 0.25%-0.8%.

2.It can be mixed in metric water or added in concrete mixer. The recommended stirring time is 150s at least. Concrete mixing test should

be made before using in order to insure concrete quality.

3.It can be compounded together retarder, defoamer, air-entertraning reagent, lignin sulfonic natrium and so on.

4. product is a product as raw materials. It is not suggested to use ELT-WR products directly in concrete or other materials without formulation

blending.The compatiblity of ELT-WR products to particular cement, aggregate and the other raw materials in the application is not guaranteed.

It should be obtained through trial mixes and formulation technologies by the users.

5,Scope of application

1, for the preparation of various levels of pumping concrete,long-distance transport of commercial concrete.
2, suitable for high-strength concrete, fluidized concrete,self-compacting, mass concrete, high performance concrete,concrete structure of water.
3, for a variety of civil works, high-rise reinforced concrete frame structure, Especially for highway, railway, bridge engineering, tunnel engineering,

hydraulic dams, nuclear power engineering, ports, docks,and other underground facilities that require high durability of concrete large concrete

structure, but also for large prestressed concrete beams, plates production , steam curing concrete and so on.

6, Packing:

7, Our Company:

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all kinds of Concrete additive

in the world market.Our Product were widely used in all kinds of concrete,mortar,plaster projects and exported to more than 30 countries, Such as USA,

Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.

Our Product was made by 100% Virgin Material with advanced equipment , we have one full set of precise testing instrument, testing equipment and

quality inspection team, technology research and development team. the management system was certified by ISO9001 and our products have been

passed the CE Certification.

8, Related Product: