SS330 Melt Extracted Stainless Steel Fiber For Refractory
|Raw Material:||100% Virgin New Polypropylene||Crack Elongation:||20+/-5%|
|Fiber Type:||Monofilament||Fiber Diameter:||20um-30um|
|Acid &Alkali Resistance:||Strong||Tensile Strength(MPa):||450 Mpa Min|
Chopped Polypropylene Glass Fiber,
6mm Polypropylene Glass Fiber,
ASTM C1116 Chopped Fiber
Factory supply 12 mm 6mm Chopped PP 6mm Fiber For Gypsum Cement Concrete
Elite PP fiber monofilament is produced by advanced technology for fiber spinning, modified by adding functional additives and special surface-treating.Mixing into cement concrete, mortar, plaster etc...,it has many advantages such as good dispersing, better water affinity, strong linking force.
It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..
1, Our PP fiber are made by 100% Virgin Polypropylene;
2, We make the pp yarn by ourselves. We always have stock and make delivery in 3-7 days;
3, Capacity 600Ton/Month, 7000Ton/Year Production;
4, 70% Export to : Ecuador, Australia, Singapore, Malaysia, Vietnam, Turkey, Iran, France, Sri Lanka, Colombia...
ASTM C1116, Type III
BS EN 14889 - 2
1, Normal Type MicroFiber Monofilament PPMF-A
|Raw Material||100% virgin new polypropylene||Crack Elongation||20+/-5%|
|Fiber Type||monofilament||Fiber Diameter||20um-30um|
|Acid &Alkali Resistance||Strong||Tensile Strength(MPa)||450 min.|
Times of 4mm
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm with 1mm more or less )
2. Special Type MicroFiber Monofilament
A. MicroFiber Monofilament PPMF-B:High Tensile Strength -----------600MPa Min
B. MicroFiber Monofilament PPMF-C:Superfine-------------------------20+/-2um Dia
A: 0.6kg, 0.9kg or 1.0kg / PE film bag
18kgs or 20kgs/ plastic woven bag
B: 0.6kg, 0.9kg or 1.0kg/ Water soluble paper bag
18kgs / carton
•Resist to shrink & crack
•Increase seepage resistance
•Increase friction resistance
•Increase freezing & thawing resistance
•Improve tendons protection
•Replace steel net (using in plastering)
• Prevent mortar split and crackle expansion
•Increase impact resistance and peeling resistance
• Cost effective
• Replaces anti crack mesh reinforcement
• Decreases construction time and labor
• Inhibits intrinsic cracking in concrete
• Disperses uniformly throughout the mix
• Do not rust
• Explosive spall control
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortarIs enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely. Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.
ELITE was established in 2007, has become one of the leading and professional suppliers of many kinds of Concrete Reinforcement Fibers in the world market.
ELITE fibers are made by 100% virgin materials with advanced equipment of yarn and cutting. We have one full set of precise testing instrument and quality inspection team, technology research & Development team.
Elite own a team with 10+ years experience.We know well of Chinese Concrete reinforcement fibers on technical inspection, marketing, transportation.
Pls feel free to contact us freely at any time
Enter Your Message