Polypropylene Polymer Synthetic MacroFiber For Concrete Reinforcement
Contact Person : Jack
Phone Number : 0086-13955140199
WhatsApp : +8613955140199
Minimum Order Quantity : | 1000kgs | Price : | Negotiation |
---|---|---|---|
Packaging Details : | 1kg/PE film bag, 20kg/Plastic Woven bag,9000kgs/20'gp | Delivery Time : | Within 15days after order confirmation |
Payment Terms : | L/C, D/A, D/P, T/T, , MoneyGram | Supply Ability : | 10000TON PER YEARS |
Place of Origin: | Anhui | Brand Name: | ELITE-INDUE |
---|---|---|---|
Certification: | CE ISO | Model Number: | EltFiber-PPMF |
Detail Information |
|||
Material: | Virgin Homopolymer Polypropylene | Length: | 6mm 12mm 19mm |
---|---|---|---|
Crack Elongation:: | 20+/-5% | Fiber Diameter: | 20-30um |
Melting Point(C Deg.): | 319°F (160°C) | Density(g/cm3): | 0.91+/-0.01 |
Tensile Strength(MPa): | 500-700 MPa | Acid/Alkali Resistance: | Excellent |
Compliance: | ASTM C-1116 | Color: | White |
High Light: | Homopolymer Polypropylene Monofilament Fiber,Virgin Polypropylene Monofilament Fiber,Homopolymer PP Monofilament Fiber |
Product Description
100% Virgin Homopolymer Polypropylene Monofilament Fiber For Basement Floors
1, Description:
ELT-MONO is used in concrete applications such as slabs-on-ground, curbs, driveways, sidewalks, basement floors,garage floors,
colored concrete, and small precast products– anywhere that the objective is to control plastic shrinkage cracking while improving basic
durability properties. Requires no mix design or placement changes!
ELT-MONO is an easy to finish micro synthetic fiber, made of 100% virgin homopolymer polypropylene monofilament. This economy-grade
fiber functions as aplastic shrinkage reinforcement intended to reduce the formation of shrinkage cracks prior to initial set and to reduce
settlement shrinkage. ELT-MONO is non-corrosive, non-magnetic, chemically inert, and 100% acid and alkali proof.
Functions
|
Advantages
|
||
Increase freezing & thawing resistance
|
Cost effective
|
||
Improve tendons protection
|
Replaces anti crack mesh reinforcement
|
||
Resist to shrink & crack
|
Decreases construction time and labor
|
||
Increase seepage resistance
|
Inhibits intrinsic cracking in concrete
|
||
Increase friction resistance
|
Do not rust
|
||
Replace steel net (using in plastering)
|
Disperses uniformly throughout the mix
|
||
Prevent mortar split and crackle expansion
|
Explosive spall control
|
3, Applications:
A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
D). Suit for any mortar projects and common concrete projects.
E). Highway, bridge and other roads.
4, Applying Instruction:
A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,
and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed.
Put cement, aggregate, additive and fiber together, then stir after adding enough water
and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.
5, Brief specification:
Compliance
ASTM C1116, Type III
BS EN 14889 - 2
1), Normal Type MicroFiber Monofilament PPMF-A
Raw Material |
Polypropylene | Crack Elongation | 20+/-5% |
Fiber Type |
Monofilament PPMF-A | Fiber Diameter | 20-30um |
Melting Point ( C Deg.) |
160 - 170 | Density (g/cm3) | 0.91+/-0.01 |
Acid &Alkali Resistance |
Strong | Tensile Strength (MPa) | 450 min. |
Length |
Times of 4mm or 6mm | Water absorbency | NO |
Normal Length |
4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc... (times of 4mm or 6mm with 1mm more or less ) |
2),Special Type MicroFiber Monofilament
A, MicroFiber Monofilament PPMF-B: High Tensile Strength -----------600MPa Min
B, MicroFiber Monofilament PPMF-C: Superfine---------------------------20+/-2um Dia
C, MicroFiber Monofilament PPMF-D: High dispersion------------------Special Surface-Treating
6, Packing:
Enter Your Message